Uncategorized

PCB Conveyor

24/04/2021

Features: Transmitting/Receiving circuit boards (PCBs) of product lines Using 24/24h operating robot Cycle time 8s/PCB Controlled by gas and electric circuits via PLC connected HMI Specs: Weight: ~500kg Input voltage: 220VAC-50Hz-1500W Gas: 0.5MPa Speed: 10m/min PCB size: Maximum 610x610mm, Minimum 310x310mm HMI Control: 7 inch Conveyor width: 760mm Automatically center the PCB on the conveyor […]

Read More

Outline Press Machine

24/04/2021

Features: Automatically transmit and receive circuit boards to and from Clamping Machine Use 6 axis robot UR5 (Universal Robot) Controlled by gas and electrical circuits via PLC-connected HMI High reliability performance: 24/24 Increase production capacity with 7.3s/pcs Cycle time Specs: Weight: ~1500kg Size (L x W x H): 3000x2500x1850mm Supply voltageL 220VAC-50Hz-2500W Gas: 0.5MPa PCB […]

Read More

Pick & Plate Machine

24/04/2021

Features: Automatically receive circuit boards from Insertion Machine Arrange the printed circuit board into the finished product tray Use 4-axis Nachi robot Controlled by gas and electrical circuit via PLC-connected HMI High reliability performance: 24/24h Increase the production capacity with 2.5s/pcs Cycle time   Specs: Weight: ~750kg Size (L x W x H): 1750x1900x1900mm Supply […]

Read More

Copper Pin Insertion Machine

24/04/2021

Features: Insert pin to circuit board. The input module uses KUKA Robot to pick up the board and move it to clamp the board. Hole diameter measuring module using Cognex camera and GT2 measuring header mounted on Nachi robot hand. Pin insertion module uses a Nachi robot with a suction header mounted on the robot […]

Read More

Smart warehouse – Automated Guided Forklift (AGF)

24/04/2021

Automated Guided Forklift Route-tracking technology: Laser Communication method: Wi-Fi Moving methods: Straight, Turn, Rotate, Manual Control Safety sensors: Front, back, left, right Battery: Lead acid/Lithium Velocity: 0 – 1.2 m/s Maximum lifting weight: 1600kg Maximum lifting height: 4600mm Operating time: 8 hours continuously since fully charged Charging mode: Manual or Automatic Accuracy: ±1cm, ±0.5º   […]

Read More

MIT University’s design-based Ventilator

24/04/2021

Non-invasive Ventilator manufactured  by Meiko Automation Joint-stock Company With following features: Adjustable Respiratory Rate, Flow Rate, Tidal Volume Patient’s breathing automatic detection 2 modes of operation: Volume controlled mode & Breathing support mode Built-in UPS backup power source, can operate up to 2 hours after unplugging from AC source Designed based on MIT University’s study

Read More